So far we’ve covered the overall plan for the car and the engine, so next is the gearbox. As with other things on this build I certainly didn’t want to go down the “kitcar” route and end up using something donated from another car and then modified to try and do what we needed. It’s not about being elitist or anything like that, I just didn’t want to have any compromises and based on the amount of torque that the 6.0L V12 is going to produce means that even if we did go down that track that we were likely to run into issues. The Porsche G50 for instance is the stable choice for anyone looking to make a mid-engined car. Some pretty straight forward modifications means they can be used / mated up to anything pretty much, however most people give them a power rating of around 450-500HP max and more importantly around 500nm max. we’re expecting around 700nm so that put us outside of that window. Now there are ways and means to strengthen them etc, but then we’re starting to look at the same kind of money as something custom.
Now this is where the struggle began. I knew that X-trac made the sequential for the Zonda R so I called them to ask since they would essentially be able to supply a complete “bolt up” experience, they basically blanked me and wouldn’t discuss anything to do with the Pagani solution. I’m sure it’s some kind of commercial agreement, but it was frustrating so I had to give up on X-trac.
Then I tried calling Hewland, but they would only supply straight cut gears which would mean it would be way too noisy for our needs. They’re bloody pricey too. Quaife was next, now if I say that Quaife were worse than useless, that would be being unfair, they were even worse than that !! I explained what I was doing (custom car project, AMG engine, scratch built) and the guy kept asking me what car it was for ! I said it’s not an existing car, it’s custom project, he said, well you’ll need to look on the website to decide what product fits your needs before I can help !! That’s the reason I’ve called the UK in the middle of the night !! I don’t know which option is the best fit, that’s why I’ve called you guys for advice now you know our needs.
Needless to say I didn’t get anywhere and went to bed extremely frustrated !!
So it turns out that Mendeola have a famous and long history in off-road transmissions and are looking to move into the road-race area. They are interested in developing a new range of gearboxes for road-race solutions and they’re interested in partnering with us to develop something for our needs that will then become a standard product for their new range ! Amazing !
Luckily for me, I was able to visit the Mendeola factory and meet with Mike Mendeola the owner and some of his guys to put a name to a face and see his facility. These guys are true professionals and what Mike doesn’t know about gearboxes just isn’t worth knowing !
So whilst I was there we discussed all of the needs and settled on a plan and rough pricing and agreed to move forward. One thing I did know is that I would need to have the gearbox quite early on in the build since I knew the first thing we would need to figure out was how we were going to fit that V12 and the gearbox into the existing space supplied from DDR with the base chassis.
Mendeola obviously couldn’t supply a finished gearbox to me anytime soon so what we agreed was that since they would base the new gearbox design so that it used the same pickup points as they existing S4/S5 design, that they would supply me with a casing and any other important items (driveshaft mounts etc) so that we could mock up our design using an empty case and then later on in the build we could ship the empty case back to them they would return our final box………. perfect!
It was such an amazing difference between someone like Mendeola and someone like Quaife.
There’s a newer entry in this story, please click here – FZ12 – Part 4
If you’ve missed the last part of our story then click here FZ12 – Part 2
or if you want to go right to the beginning then click here FZ12 – Part 1